Replace the Sash and Keep the Charm

Got some Caradco windows that need a little TLC, but not sure which model you have? No worries—we’ve got you covered. Caradco made quite a few different models over the years, each with some unique features.

Caradco replacement sashes have easily become our most popular wooden window sash replacement products. To that end, after JELD-WEN bought out Caradco, if you were to call JELD-WEN asking for repair or replacement of a Caradco sash, you would likely be directed to fensterusa.com! (Not gonna lie… that feels pretty special!)

Here’s a quick guide to help you figure out what you’re working with so you can get the right replacement sash and keep your windows looking sharp.

Caradco C-200

• Look: Painted exterior with a ½” wide trim around the glass.
• Frame: 1-3/4” thick, with a horizontal corner joinery and a deep groove behind the weatherstripping.
• Production Years: Mid-70s to late 80s.

This one’s easy to spot with its deep groove behind the weatherstripping and wide trim detail around the glass. If you see that trim and groove combo, chances are, it’s a C-200. Here’s a link to our spec page for Caradco C-200s.

2. Heritage I

• Look: Painted, flat 2” face with no interior detailing.
• Frame: 1-11/16” thick.
• Details: Check for “916” stamped in the glass spacer bar and a rubber glass gasket.
• Production Years: Late 70s to late 90s.

Heritage I has a solid, classic look with a thick frame and a clean face. If you see “916” on the glass spacer, you’re in the right ballpark.

3. Carclad I

• Look: Metal-clad exterior with square butt corner joints.
• Frame: Flat 2” face, no interior detail, 1-11/16” thick.
• Details: Also has “916” stamped in the spacer bar, plus a rubber gasket around the glass.
• Production Years: Late 70s to late 90s.

Similar to the Heritage I but with that durable metal-clad exterior, Carclad I is built to last. The square corner joints and “916” stamp will confirm it. For build specs, check out this link to our Heritage I & Carcald 1 series page.

4. Heritage II

• Look: Painted exterior, flat 2” face, no interior detailing.
• Frame: 1-9/16” thick.
• Details: Look for “716” in the glass spacer bar and a rubber gasket.
• Production Years: Roughly 1998 to 2004.

With a slightly slimmer frame than Heritage I, Heritage II keeps the same sleek design. Spot that “716” stamp, and you’re good to go.

5. Carclad II

• Look: Metal-clad with square butt corner joints.
• Frame: Flat 2” face with no interior detail, 1-9/16” thick.
• Details: “716” on the spacer bar, with a rubber gasket.
• Production Years: Around 1998 to 2004.

Almost a twin to Heritage II but with the metal cladding. If you’ve got that sturdy metal exterior and the “716” stamp, it’s a Carclad II.

Here’s a link to our Heritage II & Carcald II series page.

6. Traditional

• Look: Metal-clad with mitered corner joints.
• Frame: Flat 2” face, 1-1/2” thick.
• Details: Look for scalloped interior glass stops and a Jeld-Wen stamp on the glass.
• Production Years: About 2004 to 2007.

Traditional is a unique one, with its mitered joints and scalloped interior glass stops. If you see “Jeld-Wen” stamped on the glass, that’s a solid clue it’s a Traditional model.

Need a Hand?

Identifying your Caradco sash model can make all the difference when it comes to keeping your home’s look without the hassle and cost of full window replacement. If you’re still scratching your head over which model you’ve got, start a quote today and we’ll help you identify your sashes. We’re here to help you find just what you need!